Sandia Group, Inc., a division of Hugh M. Cunningham, Inc., is pleased to announce the addition of Talco Fire Systems to our quality line of products exclusively represented in New Mexico and El Paso, TX.

The products offered by Talco Fire Systems are your answer for NFPA-13D and 13R compact systems. The Heart of any 13D pump system is the controller and that why you will never see a simple pressure switch on one of our premium Residential Fire Pump Systems, People at Talco understands this. Lives depend on it.

A Pressure Switch Alone Is Not Enough

Commercial pressure switches applied to domestic water systems are always used in conjunction with hydro pneumatic pressure tanks that protect the switch and pump motor from the damaging effects of rapid cycling, the number one cause of system failure. The pressure tank provides draw down capacity so the pump always runs for one to two minutes. This allows dissipation of the excessive heat generated when the motor starts.
Equally as important, it keeps the pressure switch from chattering, which can destroy its contacts in a matter of minutes as motor starting current arcs across them repeatedly.

In the absence of a pressure tank, a “minimum run timer” must be used to guarantee that the pump does not rapidly turn on and off repeatedly. Since these timers are not rated for motor current it is necessary to use a properly sized motor contactor, controlled by the pressure switch and timer. Unless these measures are taken the pump will generally start and stop several times a second during the low flow situations that comprise the large majority of real life events in residential fire protection.

TALCO LSF-C – Residential Fire Pump System Features

• Available in 1.5, 2, 3 and 3 horse power electric single phase motors
• Pump housing is 316 SS volute 1 ½” suction x 1 ¼” discharge 75 psi max
• Discharge manifold includes check valve, 0-100 PSI gauge, 40/60 pressure switch, isolation ball valve.
• Controls are 230v with Minimum run timer, Pressure switch operated contactor, HOA toggle switch (Hand, Off, Auto)
• Compact size and light weight
• Pressures to 59 PSI and Flows to 60 GPM

TALCO LSF-CI – High Head/High Capacity Residential Fire Pump Systems

• Available in 1.5, 3, 5, 7.5, and 10 horse power electric single phase motors
• Pump housing is High Pressure Cast Iron Volute, Machined Bronze Impeller
• 150 PSI Max Working pressure
• Discharge manifold includes check valve, 0-100 PSI gauge, 40/60 pressure switch, isolation ball valve.
• Controls are 230v with Minimum run timer, Pressure switch operated contactor, HOA toggle switch (Hand, Off, Auto)
• Pressures to 95 PSI and Flows to 170 GPM

TALCO 13R Compact – Residential Fire Pump Systems

Talco 13R Compact package fire pump systems are specifically designed for NFPA-13R applications. Structures that fall under 13R and need a fire pump often present a significant problem: The fire pump must be fully listed and installed per NFPA-20. The expense and long lead times can provide great hardship when trying to complete a small project such as a nursing home or a four-plex. Talco has developed the 13R-C packages to provide a reliable alternative. To reduce lead times and expense Talco fits these systems with an industrial grade cast iron bronze fitted pumps that carry UL788 & CSA 108 listings. These carefully selected pumps meet the stringent performance requirements of NFPA 20, are individually tested and supplied with a certified copy of the test results. Talco’s fire pump controller, pressure sensing lines, pipe, valves, and fittings are all designed and assembled per the requirements of NFPA 20 to ensure fail-safe operation.
Please confirm with your AHJ or Code official as to whether this may be an acceptable alternative for your small project. 

TALCO FFX-Nitro Power – Residential Fire Water Supply

When you need Residential Fire Protection in areas without reliable power the Talco FFX has you covered. Talco’s FFX Nitro Power delivers up to 60 GPM of life saving water to the sprinkler system …. All with no electricity or engines needed. 

Available in 30 to 60 GPM system configurations with 25 to 100 PSI adjustable Pressure

TALCO UG Series – Underground Residential Fire Water Systems

For Many home owners the thought of giving up valuable garage space for a fire pump and storage tank is hard to swallow. When floor space is at a premium, Talco has the UG Series Underground System. Providing up to 50 GPM of life saving water to any residential fire sprinkler system, the Talco UG Series is the out of sight, out of mind alternative in Residential Fire Pump Systems.

Talco has you covered …. For over 25 years Talco Fire Systems has been building quality fire protection products. The combined 115 years of experience makes for a skilled team versed in designing, building, testing and repairing fire pump systems.

Talco Fire Systems has the experience to get the job done right.